The data measured and detected by the MESH block can be saved to a text file in the device.

Setting the file name and save destination

1. Create the following recipe and tap the file block to open the setting.
   
   
   
   
   
2. Tap the file name to set it.
   Tap "OK" without changing, the file name is saved as "New Data".
   (For first-time use of the Android version, the file name must be set by tapping.
   　If you do not want to change the file name, just save the file.)
   
   By default, the data is saved to the following location;
   
   iOS："MESH/data" in your device.
   Android："Documents/jp.co.sony.mesh/data" in "internal storage"
   Windows：MESH¥data" in "Document"
   
   
   
   
   
   
3. After entering a file name, tap "OK".
   
   
   
   
   
4. After making sure the file name is set, tap "OK".
   
   

Set the data to be saved

1. Tap the file block.
   
   
   
   
   
2. Tap "Add Data".
   
   
   
   
   
3. Tap the data you want to save to the file.
   
   
   
   
4. Make sure the data and settings and tap "OK".
   (Tap "Data" field to enter your text.)
   
   
   
   
   
5. When you run a recipe, the results are saved on your device and you can check and share the data.
   By default, the data is saved to the following location;
   
   iOS："MESH/data" in your device.
   Android："Documents/jp.co.sony.mesh/data" in "internal storage"
   Windows：MESH¥data" in "Document"