How to send sensor data from MESH to IFTTT

 

1. Create a recipe to send sensor data to IFTTT as follows.

  • Set [Event ID] in the IFTTT block settings.
  • Tap [Add Data] and set the sensor data to [Text].

In this example, temperature and humidity are each sent to IFTTT at regular intervals. Please change the settings according to the type of sensor and the intended use.

Add_data_in_MESH_app.png

 

2. Create an applet on IFTTT.com as follows

  • Set the same [event ID] as that set in the MESH app.
  • Set the input data to {{Text}} by [Add Ingredient].

Add_data_in_IFTTT.png

 

3. Test that the data is passed correctly.

  • Please see [Activity] of the IFTTT applet you created for the execution result.

sensor_data_flow_from_MESH_app_via_IFTTT.png